Single Point Load Cell PW4M
It is an aluminum single-point load cell.
You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
Load Cell(Load Cell) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS
Load Cell Product List
1～30 item / All 56 items
Displayed results
Single Point Load Cell PW6C
It is an aluminum single-point load cell.
With a low bed design, it can be used for bench scales and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
High rigidity and high response load cell Super Cell SCB
A new concept load cell that is 'hard to break' has been born! Achieving high rigidity and high responsiveness with a strain gauge sensor!
The Super Cell (SCB) is a highly durable load cell designed to address the two major failure factors of load cells: overload and cable disconnection. It achieves a load capacity of 500% and uses robot cables. Moreover, it is not only durable but also highly responsive! It allows for short stroke press fitting comparisons and reduced takt times. ■ High Rigidity Achieves rigidity equivalent to piezoelectric sensors using strain gauge sensors! The deformation during loading is minimal, making it safe for use in measuring the cutting and grinding power of machine tools. ■ Overload Capacity of 500% There is no impact on accuracy even under overload conditions of up to 500% of the rated capacity. It can stably measure under harsh loads such as pressing and press fitting for extended periods. ■ No Calibration Required All zero points and full scales are adjusted at the factory, so calibration is not necessary when replacing the load cell. ■ High Responsiveness Achieves a resonance frequency comparable to piezoelectric sensors! It can also be used for monitoring high-speed phenomena. ■ Use of Robot Cables Utilizes robot cables that are resistant to cable disconnection.
- Company：ユニパルス
- Price：Other
Single Point Load Cell PW10A
This is an aluminum single-point load cell.
You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
Waterproof Single Point Load Cell PW15AH
It is a stainless steel single-point load cell.
You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
Beam-type load cell SB14
It is a high-precision, stainless steel, fully welded hermetically sealed beam-type load cell.
The SB14 is a high-precision, stainless steel, fully welded sealed beam-type load cell. It can be used for platform scales, hopper scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
High-capacity thin load cell RTN
High-capacity, stainless steel, thin-profile load cell
This is a stainless steel thin-type high-precision load cell. It supports a wide measurement range (1 to 470 tons)! It can be used for a wide range of applications such as tank scales and truck scales! The compensation temperature range is -10 to +40°C, and the allowable temperature range is -30 to +80°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Waterproof Single Point Load Cell PW25P
Completely waterproof and high-pressure washable single-point load cell.
This is a stainless steel single-point load cell. It features a completely waterproof and high-pressure washdown sanitary design, with a round shape that allows water droplets and dust to easily fall off. Additionally, it is equipped with a reliable overload prevention mechanism. It can be used for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
Completely waterproof single-point load cell PW27AP
This is a sanitary specification single-point load cell designed for food manufacturing. It features a completely waterproof and fully stainless steel sealed structure.
This is a sanitary specification stainless steel single-point load cell designed for food manufacturing. It features a completely waterproof and fully stainless steel sealed structure. The round shape allows water droplets and dust to easily fall off, ensuring a clean design. Additionally, it is equipped with a reliable overload prevention mechanism. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp
- Company：ユニパルス
- Price：Other
Compression Load Cell UNBF
Compact and slim compression-type load cell that is easy to install in existing equipment.
UNBF is a compact and slim compression-type load cell that can be easily installed in existing equipment. The capacity ranges from 300N to 500kN and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Compression Load Cell UNGS
Stainless steel compression-type load cell. It is widely used in small sizes and low capacities.
UNGS is a stainless steel compression load cell. The rated capacities are 1, 2, 5, 10, and 20 kN. It is widely used in small and low-capacity applications. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +80°C. The cable is a φ6 4-core shielded cable, 3m long, with a bare end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Beam-type load cell Z6FC3/Z6FD1
It is a high-precision, stainless steel, beam-type load cell.
This is a high-precision, stainless steel beam-type load cell. It can be widely used for applications such as hopper scales and conveyor scales. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Single Point Load Cell USC
It is a high-precision, stainless steel, fully welded sealed single-point load cell.
USC is a high-precision, stainless steel, fully welded sealed single-point load cell. It can be used for platform scales and more. The capacities are 20, 50, and 150 kg, made of stainless steel, and fully welded and sealed. It has a high input impedance of 1100Ω. The cable is a φ5 4-core shielded cable, 3m long, with a lead wire at the end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Beam-type load cell HLCB1
No combination adjustments are needed when using multiple units, and recalibration is not required during exchanges.
HLCB1 is a high-precision, stainless steel, fully welded sealed beam-type load cell. It does not require combination adjustments or recalibration when replacing multiple units, making it suitable for use in platform scales, tank scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Compression Load Cell UNBF2
The new UNBF2, a compact and slim compression-type load cell from the UNBF series, is now available and easy to install on existing equipment!
The UNBF2 is a compact and slim compression-type load cell that can be easily installed in existing equipment. Compared to the UNBF, it has no box section, making it more compact and easier to wire. The capacity ranges from 30kN to 500kN, and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Small Tension Compression Load Cell URM
Small yet high precision! Accuracy 3/10000 (non-linearity, hysteresis, repeatability) Compact tension and compression dual-purpose load cell.
The URM is a small compression and tension type load cell. It is convenient for installation on devices and is ideal for measuring compression and tension loads. Capacities available are 50N, 100N, 200N, and 500N. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Tension, compression, thin center hole type load cell UCPI
Tension, compression, and thin center hole type load cell for load measurement.
The UCPI is a thin, center hole type load cell that is ideal for integration into press machines and tensile/compression testing machines. It has a tapped center, allowing for measurement in both tension and compression. The cable features a connector for easy replacement. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Tension and compression load cell, both ends male thread type, waterproof load cell UIS
A double-ended male screw type with minimal impact on accuracy due to lateral loads and easy installation.
The UIS is a load cell with a tensile and compressive type dual-end male thread. It has male threads on both ends and comes with a thin nut, making it easy to install with a double nut, allowing for both tensile and compressive measurements. With a height of 40 to 92 mm, it is compact and does not interfere with other equipment. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Small Compression Load Cell UNLRS
This is a small compression type load cell from the UN load cell series. It is ideal for load management during press-fitting and riveting in automatic assembly machines.
The UNLRS is a small stainless steel compression load cell with a diameter of 20mm and a height of 9.5mm. The capacities are 100N and 200N. The UNLRS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for use in production lines.
- Company：ユニパルス
- Price：10,000 yen-100,000 yen
Tension and Compression Load Cell UNCLB
This is a tension and compression dual-type load cell with an easy-to-install female thread design. It is a compact-sized load cell that is easy to integrate.
The UNCLB is a compact-sized, female-threaded compression and tension load cell that is convenient for installation. It is ideal for measuring compression and tension loads and is suitable for mounting on devices. Capacities of 500N, 1KN, 2KN, and 5KN are available. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is a recommended load sensor for integration into production lines, devices, and experimental setups. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Small Tension and Compression Load Cell USM
Strong against overload with a load capacity of 500%! A compact tension and compression dual-purpose load cell. Ideal for applications such as thread tension measurement, injection needle insertion force, and experiments!
The USM is a small compression and tension load cell. It is convenient for mounting on devices and is ideal for measuring compression and tension loads. Capacities available are 1N, 2N, 5N, 10N, 20N, and 50N. It has a strong overload resistance of 500%, allowing for highly responsive measurements. It is recommended for measuring thread tension, injection needle insertion force, and experiments. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
Small Compression Load Cell UNCSR
This is a small compression type load cell from the UN load cell series. It is an ideal load sensor for managing the load of press-fitting and crimping in automatic assembly machines.
The UNCSR is a super compact compression load cell with a diameter of 12mm and a height of 4mm. The capacities are 5N, 10N, 20N, and 50N. It is available in aluminum (5N, 10N) and stainless steel (20N, 50N). The UNCSR-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for adoption in production lines.
- Company：ユニパルス
- Price：10,000 yen-100,000 yen
Small Compression Load Cell UNLS
This is a small compression type load cell from the UN load cell series. It is an ideal load sensor for managing the load during press-fitting and riveting in automatic assembly machines.
The UNLS is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity ranges from 500N to 5kN. The UNLS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 2m long, with a fine wire at the end. The compensation temperature range is 0 to +50°C, and the allowable temperature range is 0 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. It is also readily available whenever needed, ensuring peace of mind for adoption in production lines.
- Company：ユニパルス
- Price：10,000 yen-100,000 yen
Press and Insertion Load Cell UNTCH
This is a center hole type compression load cell. It is easy to install on a press machine and is ideal for load management of workpieces such as press fitting and crimping.
UNTCH is a load cell for pressing and insertion. In the assembly processes commonly used in automotive parts, it is becoming essential to measure the load applied to the workpiece during pressing and riveting operations in order to determine quality and manage load. UNTCH is easy to install on pressing machines and is the ideal load cell for load management in pressing and riveting applications. We offer a wide range of capacities including 5kN, 10kN, 20kN, 50kN, and 100kN. Additionally, it excels in responsiveness, making it perfect for capturing dynamic load changes.
- Company：ユニパルス
- Price：Other
Tension and Compression Load Cell UPP-100N
Strong against overload with a load capacity of 500%! Ideal for click testers and push testers. This load cell achieves both high sensitivity and high rigidity.
The UPP-100N is a compact load cell that is ideal for measuring compression and tension loads, making it convenient for mounting devices and other applications. It has a capacity of 100N and can withstand 500% overload, making it very robust against overload conditions. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is recommended as a load sensor for click testers, push testers, and similar applications. We recommend the FS2000 as a digital indicator to fully utilize the performance of the UPP. ▼ Unipulse Official Online Store 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.
- Company：ユニパルス
- Price：Other
High-precision compression and tension load cell USB58
Precision 1/10000, a compression/tension type load cell developed with meticulous attention to detail.
Due to its high precision, it is ideal for calibration of testing machines and measuring instruments, research and development, and precision measurement applications. Its compact and lightweight design allows for flexible installation locations. Additionally, it is resistant to overload, easy to maintain, highly durable, and has minimal aging changes, ensuring stable long-term use.
- Company：ユニパルス
- Price：Other
Ultra-thin compression load cell UST
This is an ultra-thin compression type load cell. It is an ideal load sensor for load management during press-fitting and riveting in automatic assembly machines.
UST is a super small compression-type load cell with a diameter of 10mm, a height of 2.3mm, and capacities of 50N, 100N, 200N, and 500N, made of stainless steel. The rated output is approximately 1mV/V, and the allowable overload is 150% R.C. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +70°C. The cable is a φ1.6 4-core shielded cable, 1m long, with a tapered end.
- Company：ユニパルス
- Price：Other
Ultra-compact compression load cell UCW/UCW2
This is a super compact compression type load cell. It is an ideal load sensor for managing the load during press-fitting and riveting in automatic assembly machines.
The UCW is a stainless steel ultra-compact compression load cell with a diameter of 7mm, a height of 4.5mm, and capacities of 50N, 100N, 200N, and 500N. The UCW2 has a diameter of 6mm, a height of 3.5mm, and capacities of 10N and 20N. The rated output is approximately 1mV/V, and the allowable overload is 200% R.C. The compensated temperature range is 0 to +60°C, and the allowable temperature range is -10 to +70°C. The cable is a φ1.6 4-core shielded cable, 0.5m long, with a fine wire at the end.
- Company：ユニパルス
- Price：Other
Small high-capacity compressed load cell USH/USH2
This is a compact, high-capacity compression-type load cell. It is an ideal load sensor for managing the load during press-fitting and riveting in automatic assembly machines.
USH is a small stainless steel compression load cell. The capacities are 10kN, 20kN, and 50kN. The cable is a φ2.5 6-core shielded robot cable, 3 m long, with a terminal lead (USH-10kN, USH-20kN), and a φ5 6-core shielded robot cable, 3 m long, with a terminal lead (USH2-50kN). The compensation temperature range is -10 to +70°C, and the allowable temperature range is -30 to +85°C.
- Company：ユニパルス
- Price：10,000 yen-100,000 yen
Small Compression Type Load Cell UCC/UCC2/UCC HL
This is a small compression type load cell. It is an ideal load sensor for managing the load during press-fitting and riveting in automatic assembly machines.
The UCC is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity is 10kN and 20kN. The cables are φ2 4-core shielded robot cable 2m with a terminal lead (UCC-10kN), φ3 4-core shielded robot cable 3m with a terminal lead (UCC2-20kN), and φ2 4-core shielded fluororesin cable 3m with a terminal lead (UCC(HL)). The compensation temperature range is 0 to +50°C (UCC, UCC2), -40 to +150°C (UCC(HL)), and the allowable temperature range is -10 to +60°C (UCC, UCC2), -40 to +150°C (UCC(HL)).
- Company：ユニパルス
- Price：Other
